Bottles in a Winery vintage wall mural
Reference: F6830What is the Bottles in a Winery Vintage Wall Mural?
The Bottles in a Winery Vintage Wall Mural is the perfect addition to any wine lover's home. The design features a beautiful display of old bottles in an industrial winery cellar, giving the room a vintage touch. The non-woven wallpaper is manufactured in matte colors and has a grammage of 180 grams per square meter. It is easy to apply using glue on the wall or product, and the tools needed are a roller, brush, and cutter. The mural has a durability of 10-15 years and can be easily removed by wetting it with a sprayer. The mural is produced and shipped in rolls 50 centimeters wide, making it easy to install.
Why Use It for Decoration?
The Bottles in a Winery Vintage photo Wall Mural is the perfect decorative addition for any wine enthusiast. This mural adds an industrial touch to your space and provides a vintage atmosphere. The design features old bottles in an industrial winery cellar, making it a great conversation starter for guests. This mural creates a unique and eye-catching focal point in any room.
How to Apply It?
Applying it is a simple process. First, clean the wall or surface where you want to apply the mural. Then, apply glue to the wall or mural. Next, align the mural with the wall and use a roller, brush, and cutter to smooth out any air bubbles and ensure the mural is properly aligned.
Why Buy from Our Online Shop?
We offer a high-quality product with a durability of 10-15 years, produced in rolls 50 centimeters wide for easy installation. Our mural is manufactured in matte colors and has a grammage of 180 grams per square meter, ensuring a high-quality product. The mural is easy to clean with a damp cloth and a little neutral soap, making it easy to maintain.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.