Dark Steel texture Bathroom wall Mural
Reference: F6842This Dark Steel Bathroom wall Mural is manufactured in matt colours and has a beautiful texture, making it an excellent choice for interior design projects. It's made of non-woven wallpaper, and should be applied using glue on the wall or on the product. The tools necessary for application are a roller, a brush, a brush and a cutter. It can be easily cleaned with a damp cloth and a little neutral soap. It has a grammage of 180 grams per square metre and a durability of 10-15 years. It is produced and shipped in rolls 50 centimetres wide and has an M2 reaction to fire certification.
Why This Product Should Be Used for Decoration
The Dark Steel Dark Steel mural for wall is a perfect choice for those who wish to add a touch of sophistication and style to their homes. The black oxide coating gives off a unique, glossy finish that will make any room stand out. Furthermore, it is incredibly durable and can last for up to 10-15 years, making it a great investment. The fact that it is applied using glue makes it very easy to install and remove, and the fact that it can be cleaned with a damp cloth and soap makes it a great option for bathrooms and other wet areas.
How to Apply This Product
Applying it is a relatively simple process. First, you must measure the area where you want to install the wall mural and make sure it is the correct size. Then, you need to apply glue on the wall and on the product and spread it evenly with a roller. Once the glue is dry, you can cut the product to the desired size with a cutter, and finally, you can apply it to the wall with a brush.
Why Buy This Product in Our Online Shop
It is a great choice for those looking to add a touch of elegance and style to their home. Our online shop offers a wide selection of this product, allowing you to find the perfect fit for your décor. Furthermore, it is easy to install and remove, making it a great option for those who are looking for a temporary solution. Finally, it is incredibly durable, offering a lifespan of up to 10-15 years.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.