Subway Station Architecture city wall mural
Reference: F8674A detailed view of a subway station featuring distinct architectural elements. The elegant patterns on the ceiling and tiled floors create a unique ambiance, while waiting passengers and train cars enhance the urban scene. This representation captures the essence of city life and transit experience.
Transform your space with our stunning Subway Station Architecture city wall mural. This design beautifully captures the essence of urban life, featuring a blend of metro stations, public transport, and architectural elegance. The vibrant artwork brings the hustle and bustle of the city right into your home, creating an immersive and dynamic atmosphere.
Why this product should be used for decoration
The Subway Station Architecture city wall mural is an inspiring choice for anyone looking to elevate their interior design. Its urban aesthetic not only adds depth to your walls but also sparks conversations and ignites creativity. Imagine the charm of a busy subway station adorning your living space, making it a focal point that resonates with both modern and classic sensibilities!
How to apply this product
Applying the Subway Station Architecture city wall mural is a breeze! Simply use glue to adhere it to your wall, employing a roller and brush for a smooth finish. With easy-to-follow instructions, you can transform your environment in no time!
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.