Floral Burst flower wallpaper
Reference: P8232Vibrant floral pattern with a retro flair, featuring bold bursts of flowers in lively colors that bring an energetic and decorative look to space.
The Floral Burst flower wallpaper is a vibrant and decorative design that features abstract, floral, and folk patterns. The matt colours give it a stylish and modern look, making it the perfect choice for adding a touch of elegance to any space. This non-woven wallpaper is easy to apply using glue and basic tools like a roller, brush, and cutter. It can be easily cleaned with a damp cloth and neutral soap, ensuring long-lasting beauty. With a grammage of 180 grams per square metre, it offers durability for 10-15 years and can be removed effortlessly by wetting the product with a sprayer. Additionally, it comes with an M2 reaction to fire certification for added safety. This stunning wallpaper is produced and shipped in rolls 50 centimetres wide, making it a versatile choice for a variety of decorating needs.
Why this product should be used for decoration
The Floral Burst flower wallpaper is a must-have for anyone looking to infuse their space with a burst of color and style. Its vibrant and decorative design adds a touch of elegance to any room, creating a welcoming and inviting atmosphere. Whether used to accent a feature wall or to add a pop of color to an entire room, this wallpaper is sure to make a statement and leave a lasting impression.
How to apply this product
Applying the Floral Burst flower wallpaper is a simple and straightforward process. Start by preparing the wall and gathering the necessary tools, including glue, a roller, brush, and cutter. Then, carefully measure and cut the wallpaper to fit the desired area. Apply the glue to the wall or the product, and carefully smooth out any air bubbles. Once in place, use a damp cloth to clean off any excess glue and admire the stunning transformation!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.