Retro Cassette Array art wallpaper
Reference: P8814A vivid array of retro cassette tapes arranged in a colorful pattern, evoking nostalgia for the music and audio culture of the past. This design encapsulates vintage vibes through its repetition of classic audio cassettes.
The Retro Cassette Array art wallpaper features a unique design with a nostalgic touch, incorporating cassette tapes and musical elements. The pattern is a perfect addition to any space, adding a vintage and musical vibe that will bring back memories of the good old days of audio nostalgia!
Why this product should be used for decoration
Transform your space with the Retro Cassette Array art wallpaper, infusing it with a sense of musical nostalgia and vintage charm. This wallpaper is the perfect choice for those who want to add a unique and artistic touch to their decor. Let the retro vibes inspire you and create a space that truly stands out!
How to apply this product
Applying the Retro Cassette Array art wallpaper is a breeze! Simply use glue to adhere it to the wall or product, and grab a roller, brush, and cutter to ensure a smooth application. Cleaning is easy with a damp cloth and neutral soap, and with a durability of 10-15 years, this wallpaper is a long-lasting choice that can be easily removed with a sprayer. Plus, it comes with an M2 reaction to fire certification for added peace of mind!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.