Stone Slab Pattern stone wallpaper
Reference: P6825The image displays a textured pattern reminiscent of stacked stone slabs. This design imparts a natural and architectural feel, suitable for enhancing an interior space with a sense of solidity and earthiness.
The Stone Slab Pattern stone wallpaper features a stunning design that perfectly captures the essence of natural stone walls, with a beautiful texture and brick effect that adds a touch of stacked architecture to any interior design. This non-woven wallpaper is manufactured in matt colors, making it a durable and long-lasting option for decorating your space. With a grammage of 180 grams per square meter, this wallpaper is easy to clean with a damp cloth and a little neutral soap, and it has a durability of 10-15 years. Applying the Stone Slab Pattern stone wallpaper is simple, requiring only glue, a roller, a brush, and a cutter. Plus, it can be easily removed by wetting the product with a sprayer, giving you the flexibility to change up your decor. This wallpaper is produced and shipped in rolls 50 centimeters wide and has an M2 reaction to fire certification, ensuring both quality and safety.
Why this product should be used for decoration
The Stone Slab Pattern stone wallpaper is the perfect choice for adding a touch of natural elegance to any space. Its realistic stone effect and captivating pattern create a unique atmosphere that will inspire and uplift. Whether you're looking to enhance your home or office, this wallpaper brings a sense of timeless beauty and sophistication to any room, making it an ideal option for decoration.
How to apply this product
Applying the Stone Slab Pattern stone wallpaper is a simple process that requires only a few tools and some glue. Begin by prepping your wall and cutting the wallpaper to size. Then, apply the glue and carefully hang the wallpaper, smoothing out any air bubbles as you go. Once in place, trim any excess and enjoy your stunning new decor.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.