Vertical Striped Design striped wallpaper
Reference: P7277A striking vertical striped pattern enhances any space with a sense of rhythm and structure. The alternating bands create a visually engaging experience, offering a simple yet captivating backdrop for modern interiors.
The Vertical Striped Design striped wallpaper features a stunning graphic design with bold red vertical stripes that create an eye-catching pattern. This non-woven wallpaper is manufactured in matt colours, making it ideal for adding a touch of elegance and sophistication to any space. The durability of 10-15 years ensures that this wallpaper will stand the test of time, while the M2 reaction to fire certification provides added peace of mind. Applying this wallpaper is a breeze with the use of glue, a roller, a brush, and a cutter. Once in place, it can be easily cleaned with a damp cloth and a little neutral soap. When it's time for a change, the wallpaper can be effortlessly removed by wetting it with a sprayer. Each roll measures 50 centimetres wide, providing ample coverage for any room.
Why this product should be used for decoration
The Vertical Striped Design striped wallpaper is the perfect choice for adding a bold and modern touch to any room. The striking red vertical stripes create a visually appealing pattern that will instantly elevate the decor of any space. Whether used as an accent wall or to cover an entire room, this wallpaper is sure to make a statement and create a unique and stylish atmosphere.
How to apply this product
When applying the Vertical Striped Design striped wallpaper, ensure that the surface is clean, smooth, and free from any imperfections. Use a high-quality wallpaper adhesive and a suitable brush or roller to apply the glue evenly. Carefully line up the edges of each strip, smoothing out any air bubbles as you go. Use a sharp cutter to trim any excess material, and repeat the process until the entire area is covered.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.